AB · Calgary

Two-Tier Bike Racks in Calgary

Two-Tier Bike Racks in Calgary. Two-tier bike racks are double-deck bicycle parking systems that stack bikes on two levels — ground level and an elevated upper tier — effectively doubling the parking capacity in the same floor area.

Product Details

Two-Tier Bike Racks in Calgary

Two-tier bike racks are double-deck bicycle parking systems that stack bikes on two levels — ground level and an elevated upper tier — effectively doubling the parking capacity in the same floor area. These high-density systems are the standard solution for transit stations, university campuses, corporate parking garages, and multi-residential buildings across Canada where space is at a premium and demand for bike parking exceeds what single-level racks can accommodate. The upper tier features a gas-assisted hydraulic lift mechanism that makes loading and unloading effortless — even for cyclists who aren't particularly strong.

Why Choose Two-Tier Bike Racks in Calgary?

The user simply pulls the upper tray out and down to ground level using the ergonomic handle, rolls the bike into the wheel guide, and releases the tray which glides smoothly back to the upper position on gas spring cylinders. The entire process takes less than 10 seconds and requires minimal force, making it accessible to a wide range of users. The lower tier accommodates bikes directly at ground level with a simple wheel-slot design.

Features & Specifications

Our two-tier racks accommodate 8 to 20 bicycles per unit in the footprint that would normally hold only 4 to 10 bikes on single-level racks. The powder-coated steel construction withstands years of daily use, and the locking slide mechanism on each tier provides secure anchor points for U-locks and cable locks. Each tier includes rubber-lined wheel channels that protect bicycle rims from scratches and hold bikes upright without the need for kickstands.

Installation in Calgary

Two-tier bike racks are available in freestanding and wall-anchored configurations, with optional end panels for a finished appearance in visible locations. BikeRacks.ca supplies two-tier systems to transit agencies including GO Transit and city transit commissions, universities, hospital parking facilities, and condominium developers who need to meet municipal bicycle parking minimums in compact spaces.

Local Conditions in Calgary

Calgary experiences an average winter temperature of -11°C with approximately 150 cm of annual snowfall, making weather-resistant galvanized steel or stainless steel finishes essential for bike rack longevity. The cycling season in Calgary typically spans 7 months, during which bike rack demand peaks at commercial and residential properties.

Local bylaw: City of Calgary Land Use Bylaw 1P2007 mandates bicycle parking with Class 1 and Class 2 requirements for commercial and residential developments. BikeRacks.ca ensures all installations in Calgary meet or exceed municipal requirements.

Cycling in Calgary

Calgary is Canada's energy capital with 1.3 million residents and an extensive pathway network that is one of the longest in North America, stretching over 950 kilometres along the Bow and Elbow Rivers. The city's cycle track network in the downtown core has transformed Stephen Avenue, 5th Street, and 12th Avenue into cycling corridors connecting office towers, restaurants, and entertainment venues.

BikeRacks.ca delivers two-tier bike racks to Calgary, Alberta with fast shipping and professional installation. Contact us for a free quote tailored to your Calgary project.

Double parking capacityGas-assisted upper lift8-20 bike capacityLocking slide mechanismPowder-coated finishLow-effort loading

$500-$2,000

More Options

Other Products in Calgary

$75-$250

Wall Mounted Bike Racks

Wall-mounted bike racks are the ultimate space-saving solution for indoor and outdoor bicycle storage in Canada. Designed to hold bicycles vertically or horizontally against any wall surface, these racks free up valuable floor space in garages, apartments, condominiums, commercial buildings, and bike rooms. Our wall-mounted systems are constructed from heavy-duty powder-coated steel that resists rust and corrosion even in Canada's harsh winter climate, with rubber-coated hooks and cradles that protect your bicycle's frame and finish from scratches and damage. Each wall-mounted rack supports up to 50 lbs per bike, accommodating everything from lightweight road bikes to heavier hybrid and commuter bicycles. The mounting hardware is tamper-resistant and designed for concrete, wood stud, and steel beam installations, ensuring your bikes stay securely in place. Vertical wall-mount configurations hold the bike by the front wheel, reducing the wall footprint to just 18 inches of horizontal space per bicycle, while horizontal configurations cradle the frame at two points for easy access and a clean display appearance. Wall-mounted bike racks are ideal for residential use in small condos and apartments where floor space is at a premium, as well as commercial applications in office buildings, retail stores, and fitness centres where employees and customers need secure indoor parking. Property managers across Canada choose wall-mounted systems for bike rooms in multi-residential buildings because they maximize the number of bicycles that can be stored in a given area while maintaining clear sightlines for security cameras. Installation is straightforward with our included mounting template, lag bolts, and detailed instructions — most installations take under 30 minutes per rack with basic hand tools. BikeRacks.ca offers single-bike hooks, double-bike vertical racks, and multi-bike wall rail systems that can accommodate up to 10 bicycles along a single wall, making them the most versatile category in our product line. All wall-mounted racks ship with a 10-year structural warranty, and our customer support team provides free phone and email guidance on choosing the right configuration for your space. Whether you need a single bike hook for a downtown Toronto condo, a 10-bike rail system for a Vancouver office bike room, or a bulk order for a Calgary property management portfolio, BikeRacks.ca delivers fast with competitive pricing and expert advice on every order. We also offer custom powder-coat colours for wall-mounted racks to match your interior design or corporate branding, with a minimum order of just 5 units for custom colour production. Contact our team today for a free consultation on the best wall-mounted bike rack solution for your specific space and budget requirements.

Indoor/outdoor usePowder-coated steelRubber-coated hooks

Learn More

$100-$500

Floor Standing Bike Racks

Floor-standing bike racks are versatile, freestanding bicycle parking solutions that require absolutely no drilling, bolting, or wall mounting. Simply place them on any flat surface — concrete, asphalt, tile, or even compacted gravel — and they're ready to use immediately. This makes them the most flexible option for businesses, event organizers, and homeowners who need portable, repositionable bike parking that can be moved seasonally or as needs change. Our floor-standing racks are available in single-bike display stands for retail showrooms and bike shops, as well as multi-bike configurations holding 2, 4, 6, 8, or 10 bicycles in a single unit. The heavy-gauge steel construction features a weighted anti-tip base design that prevents the rack from toppling even when fully loaded, with a total weight capacity exceeding 200 lbs. Each bike slot is spaced to accommodate handlebars of varying widths, and the adjustable spacing option on our larger models lets you customize the distance between bikes to fit different bicycle styles including mountain bikes with wide handlebars, road bikes, and fat-tire bikes. The powder-coated steel finish is available in black, silver, and custom colours, providing corrosion resistance rated for year-round outdoor use in Canadian weather conditions including rain, snow, and road salt exposure. Rubber-tipped contact points prevent scratches on bicycle frames and wheels, while the open design allows cyclists to secure their bikes with U-locks, cable locks, or chain locks through the frame and wheels. Floor-standing bike racks are especially popular for temporary events like farmers' markets, outdoor festivals, sports tournaments, and community gatherings where permanent installations aren't practical. They're also the go-to choice for retail stores that want to offer customer bike parking without modifying their building exterior, and for residential garages where renters can't drill into walls. BikeRacks.ca ships floor-standing racks fully assembled or with minimal assembly required — most models are ready to use within 15 minutes of unboxing. Our floor-standing racks come with a 10-year structural warranty on the steel frame, and powder-coated finishes are warranted against peeling and chipping for 5 years of outdoor use. Volume pricing is available for orders of 10 or more racks, making floor-standing models an economical choice for municipal event programs and retail chains with multiple locations across Canada. For seasonal outdoor dining patios, breweries, and farmers's markets that need bike parking only during warmer months, our portable floor-standing racks can be stored indoors during winter and redeployed each spring with zero setup time required.

No drilling required2-10 bike capacityHeavy-gauge steel

Learn More

$200-$800

Outdoor Commercial Bike Racks

Outdoor commercial bike racks are the backbone of public bicycle parking infrastructure across Canada, built to withstand heavy daily use, extreme weather, and attempted vandalism in high-traffic locations. These are the racks you see outside grocery stores, transit stations, city parks, shopping centres, government buildings, and commercial plazas — engineered to last 15 to 25 years with minimal maintenance. Our commercial outdoor racks are available in the three most popular designs: the inverted-U (staple) rack that provides two secure locking points per bike, the wave (undulating) rack that fits maximum bikes in minimum linear space, and the post-and-ring design favoured by many Canadian municipalities for its clean aesthetic and accessibility compliance. All models are fabricated from 16-gauge steel tubing — either hot-dip galvanized for maximum corrosion resistance or 304 stainless steel for a premium architectural finish that maintains its appearance for decades. Installation options include surface-mount with expansion anchors for existing concrete pads, and in-ground embedded mount where the rack legs are set into fresh concrete for the most permanent and tamper-proof installation. Our commercial racks meet CAN/CSA standards for bicycle parking and are designed with ADA/AODA-compliant spacing to ensure accessibility for all users, including cyclists with adaptive bicycles and tricycles. The galvanized finish is specifically chosen for Canadian conditions — it resists the corrosive effects of road salt, de-icing chemicals, freeze-thaw cycles, and UV exposure that destroy painted finishes within a few seasons. Each rack provides secure locking points that allow cyclists to lock both the frame and wheel with a standard U-lock, reducing theft risk significantly compared to wheel-only locking designs. BikeRacks.ca supplies outdoor commercial bike racks to municipalities, property managers, retailers, and institutions across all 10 provinces. We offer bulk pricing for orders of 10 or more racks, and our team can help you determine the right quantity, spacing, and placement to meet your local bylaw requirements and maximize cycling convenience for your visitors and employees. Every commercial rack we sell is backed by a 10-year structural warranty and ships Canada-wide from our Ontario and British Columbia distribution centres. For large municipal rollouts, we offer project management support including site surveys, engineered drawings, and coordinated multi-site delivery and installation across your entire jurisdiction. Our commercial racks are the most popular product category at BikeRacks.ca, trusted by hundreds of municipalities, school boards, transit agencies, and commercial property managers from Victoria to St. John's for reliable, long-lasting outdoor bicycle parking infrastructure. Contact BikeRacks.ca today for expert guidance on selecting the right outdoor commercial bike rack for your specific location and requirements.

Galvanized or stainless steelU-shaped and wave designsSurface-mount or in-ground

Learn More

Covered bike shelter with metal roof protecting parked bicycles from weather

$1,500-$8,000

Bike Shelters & Covered Parking

Bike shelters provide weather-protected bicycle parking that shields bikes from rain, snow, sleet, and UV damage while keeping them visible and accessible. In Canada's challenging climate — where winter storms can dump 30 cm of snow overnight and spring rain can last for days — covered bike parking is essential for encouraging year-round cycling at workplaces, transit stations, schools, and residential complexes. Our bike shelter systems feature clear polycarbonate or corrugated steel roofing panels supported by rust-resistant aluminum or galvanized steel frames. The polycarbonate option provides natural light transmission while blocking UV rays that degrade bicycle tires and seats, while the steel roofing option offers maximum durability for high-snow-load areas in Northern Ontario, the Prairies, and Quebec. Optional side panels provide wind protection without fully enclosing the shelter, maintaining the open, visible design that deters theft and meets fire code requirements. Bike shelters are available in modular configurations that accommodate 6, 10, 20, 30, or 40 bicycles, and multiple modules can be connected end-to-end for larger installations. The modular design means you can start with a smaller shelter and expand as cycling demand grows — a common pattern for Canadian employers implementing corporate sustainability and active transportation programs. Each shelter includes integrated bike racks (inverted-U or wave style) bolted to a concrete pad, with optional add-ons including LED lighting for safety, security camera mounting brackets, and electric vehicle charging connections for e-bikes. Custom colour options allow shelters to match corporate branding, municipal design standards, or building aesthetics. Our engineering team provides stamped structural drawings for building permit applications and can calculate snow loads, wind loads, and foundation requirements for any location in Canada. BikeRacks.ca handles the complete process from site assessment and design through manufacturing, delivery, and professional installation by certified crews in major cities across Canada. Our bike shelters carry a 10-year structural warranty on the frame and a 5-year warranty on roofing panels. We maintain an inventory of replacement panels and components for all current models, ensuring long-term serviceability. For transit agencies and large corporate clients, we offer maintenance contracts that include annual inspections and proactive component replacement to keep your bike shelter in optimal condition year after year. Bike shelters are increasingly required by municipal bylaws for new commercial and institutional developments, and our team helps architects and developers specify the right shelter configuration to meet code requirements while complementing building design aesthetics. With roofing options rated for snow loads from 30 to 100 psf depending on your location in Canada, our engineering team ensures your shelter is properly specified for local building code compliance from the start.

Polycarbonate or steel roofing6-40 bike capacityModular expandable design

Learn More

Secure outdoor bike lockers with individual locking compartments for bicycle storage

$800-$2,500

Bike Lockers & Secure Storage

Bike lockers provide the highest level of security for bicycle storage, fully enclosing each bicycle in an individual lockable compartment that protects against theft, vandalism, and weather damage. Unlike open bike racks where bikes are exposed to the elements and visible to potential thieves, bike lockers create a private, sealed environment where a cyclist's bicycle, helmet, panniers, and accessories remain completely hidden and protected. Our bike lockers are constructed from heavy-gauge ventilated steel panels with a durable powder-coated or galvanized finish that resists corrosion in all Canadian weather conditions. Interior dimensions of 72" × 30" × 48" comfortably fit any standard bicycle including e-bikes, cargo bikes with smaller frames, and bicycles with accessories like baskets, lights, and child seats attached. Ventilation slots in the panels prevent moisture buildup and condensation that can cause rust on bicycle components, while maintaining the visual privacy of the locker contents. Lock options include traditional keyed cylinder locks, combination padlock hasps, and modern electronic smart locks with RFID card or smartphone app access that allow administrators to manage user access, track usage, and remotely unlock lockers when needed. Electronic systems are particularly popular with transit agencies, universities, and corporate campuses that need to manage locker assignments for hundreds of users. Bike lockers can be installed individually or in banks of 4, 6, 8, or more units, and stackable two-tier configurations double the storage capacity in the same floor area. Surface-mounted models bolt to existing concrete, while some designs include integrated levelling feet for uneven surfaces. BikeRacks.ca supplies bike lockers to GO Transit stations, university campuses, hospitals, and corporate headquarters across Canada where employees and commuters demand secure, weather-protected bicycle storage. Our team assists with site planning, ADA/AODA accessibility compliance, and municipal permit applications. Bike lockers are built to last with a 10-year structural warranty and electronic lock systems warranted for 5 years. We stock replacement keys, lock cylinders, and electronic access control components for all current models. For transit agencies managing hundreds of lockers across multiple stations, we provide fleet management software integration and centralized access control administration that simplifies user registration, payment processing, and maintenance scheduling. Whether you need a single locker for a private parking spot or a 200-unit installation at a major transit hub, BikeRacks.ca provides the product, engineering, and support to deliver a successful bike locker project on time and on budget anywhere in Canada. Our electronic lock options integrate with most building access control systems, allowing seamless management alongside your existing door security, elevator access, and parking gate systems for a unified property management experience.

Fully enclosed designKeyed or electronic locksVentilated steel panels

Learn More

FAQ

Frequently Asked Questions

Where can I buy two-tier bike racks in Calgary?

BikeRacks.ca delivers two-tier bike racks throughout Calgary and surrounding areas. Contact us for a free quote with local delivery options.

How much do two-tier bike racks cost in Calgary?

Two-Tier Bike Racks prices in Calgary range from $500-$2,000 depending on configuration. With winter temperatures averaging -11°C and 150 cm of annual snowfall, we recommend galvanized steel finishes for maximum durability. Volume discounts are available for orders of 10+ units.

Do you offer two-tier bike racks installation in Calgary?

Yes, we provide professional two-tier bike racks installation in Calgary including concrete anchoring and surface-mount or in-ground options.

Two-Tier Bike Racks in Other Cities

TorontoOntario OttawaOntario MississaugaOntario BramptonOntario HamiltonOntario LondonOntario

Get Two-Tier Bike Racks in Calgary

Free quote within 24 hours. Canada-wide delivery.

Get a Quote in Calgary